Netsys NV-600L/R VDSL2 (Master-/Slave-Modems)

1 Tag**

380,80 EUR
inkl. 19% MwSt.
zzgl. Versand

320,00 EUR
excl. 19% VAT / MwSt.

zzgl. Versand

Eine VDSL2 Datenverbindung ist nur durch ein VDSL2-Modempaar möglich welches aus einem Master-/Slave-Modem besteht.

Das Netsys NV-600L/R VDSL2 Modem ist mit dem Infineon-Chipsatz bestückt und erlaubt somit Punkt-zu-Punkt-, sowie auch Providerverbindungen FTTB-Anschlüsse (Fibre to the building) wie Angebote von z.B. T-Home, NetCologne, M-net etc..

Das Mastermodem hat einen DHCP-Server integriert und läßt sich in wenigen Minuten über das Webinterface per HTTP, TFTP oder auch über den RS232 Konsolenport konfigurieren.

Das Netsys NV-600L/R VDSL2 Modem hat bereits einen POTS / ISDN Splitter eingebaut sowie wird auch NAT/DHCP/DMZ/uPnP(Plug & Play) unterstützt.

Netsys NV-600L VDSL2 (CO Modem - Master)

Netsys NV-600R VDSL2 (CPE Modem - Slave/Client)

General Description
Netsys' NV-600R is a VDSL2 Modem leverages the extraordinary bandwidth promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step in the delivery of new high-speed Internet applications to end-users in their homes or offices. Quick, easy and economical to install and maintain, the NV-600L works with the NV-600R over existing copper wire infrastructure. NV-600R is a CPE (Customer Premise Equipment) device
VDSL2 will allow operators worldwide to compete with cable and satellite operators by offering services such as HDTV, VOD, videoconferencing, high speed Internet access and advanced voice services including VoIP, over a standard copper telephone cable.
VDSL2 is seen by many operators as an ideal accompaniment to a fiber to the premises (FTTP) rollout, where for instance fiber is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.

Key Features & Benefits
Compliant with IEEE 802.3 & 802.3u Ethernet Standards
Compliant with G993.2 VDSL2 standards
Provides 4 x 10/100M auto-sensing RJ-45 Ethernet ports
POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)
VDSL2 RJ-11 port x 1
Supports Bandwidth setup with symmetric 100 Mbps VDSL RJ-11 ports
LED indicators: Power LED x1, Ethernet Link/Active LED x 4, VDSL Link LED x 1
Supports auto speed for VDSL2 port
Supports Web management(HTTP) & TFTP, Console(RS232)
Supports PPPOE
Supports uPnP(Plug & Play)
Supports Firewall
Supports Route & Switch mode
Supports Loop back
Supports SNR indicator for check phone wiring quality.
Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
Support 997,998 band plan
Provides surge protection for VDSL2 port
Switch method : store and forward, Half duplex : Back pressure
Max. Bandwidth: symmetric 100 Mbps / 0.3 Km
Power consumption : 7.5w
Dimension: L x W x H = 184mm x 146mm x 40mm(7.2" x 5.74" x 1.57")
Operating temperature: 0°C to 50°C (32 to 122F)
Storage temperature: -20 to 65°C (-4F to 149F)
Operating humidity: 10% to 90% (non-condensing)
AC-to-DCadapter: Input range: 100VAC~240VAC/50~60Hz, Output: 12VDC/1A
EMI Compliant: CE, FCC, VCCI
Chipset: Infineon.


Copyright © 2014 by Powerline-Shop.com | Webdesign: MG-MediaStudio

Nach oben